• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a Subaru Key Fob

Subaru Foresters, Outbacks, and Crosstreks are equipped with a smart feature that allows you to lock your car and leave it safe. This clever feature allows you to lock your vehicle and store it safely.

It is possible to purchase a replacement Subaru key fob at hardware stores or online. However, you should visit the service center at a Subaru dealership to get an experience that is more personal.

How to Replace Your Subaru Key Fob

If you have lost your key fob, or you need to replace the battery, these simple steps can assist. Make sure you have a screwdriver as well as a replacement battery ready (ideally CR2032 3-V). Key fobs may require a spudger device to remove the case from the circuit board. Before you attempt to replace it ensure that you have read your owner's guide to make sure that you are using the right battery type for your vehicle.

Press the small silver button on the back of the Subaru key fob. This will open the key's metal and allow you to pull it out. Insert the screwdriver's tip into this slot to open the gap between the front and back of the key fob's frame, giving you access to the internal components. Remove the key from the metal and use your screwdriver for separating one of the housings for the control module that houses the battery.

Find the flat, round battery after the housing has been removed. You should be able to see it easily, as the battery is surrounded by tiny tabs that hold it in the right position. Replace the old battery with the new one. Make sure the number is facing upwards. Then, you can reassemble the key fob and test it to ensure that it works as intended. In the majority of cases, your car will chime and the locks should be activated when you press the lock button on your key fob.

Why Go to a Dealership to purchase a Key Fob replacement?

Subaru key Fob Cost key fobs make it simple to lock and start your car remotely. As with all electronic devices, key fobs can break or become obsolete. There are a variety of options to replace your subaru forester replacement key cost's key fobs in Bartow or Lake Wales.

Find out what kind of key fob you've got. Older models with an actual key inside are more of a teardrop form, while the newer models are a rectangular shape. Open the case to expose the transmitter circuitboard and battery. Remove the old battery and replace it with a fresh one. Make sure you use the correct polarity and position otherwise your car will not start.

Typically, dealerships have the most comprehensive programmers for your car model. They can also offer the most secure option. However, they typically have higher overhead costs and may charge more than a hardware store or locksmith.

You may also find an equivalent at an auto parts store or on the internet. If you choose this route, you should be aware that Consumer Reports has found some off-brand remotes that don't work with the system in your car. Additionally, a lot of online retailers selling replacement remotes require proof of ownership before they can program the new remote for you. You can ask your local mechanic or dealer to do it for you. However, this may cost more.

Why go to a Hardware Store for a Key Fob Replacement?

The key fob permits you to start your car and unlock it without the use of a physical key. Subaru's key fobs are packed with features that make driving a car a lot easier and more enjoyable. They can lock and unlock doors while also allowing you to start and unlock the engine, open and open the gas cap as well as switch on the light.

Most newer vehicles come with a fob that must be programmed prior to you can use it. The devices are provided with unique codes by the manufacturer that only locksmiths and dealerships are able to access.

If you are unable to locate or repair the fob, it's best to visit a dealer. They have the software to reprogram blank fobs to work with the specific model. They can also cut you a new key, and place it inside the fob.

If you're looking to experiment and save money, some online sellers offer blank key fobs that they are able to program for you. They aren't as reliable as the ones you purchase directly from a dealer.

The 8-digit number on the door sill of the driver's car. Once you've written down your first digit, get in your car and push the lock button repeatedly as it takes to match the number. Repeat this process until you have reached the final number. After entering the last digit, take off the ignition key and listen to the dash for a chime that signals that the system has been properly programmed.

Why Should You Visit a Subaru Dealership to Replace a Key Fob?

Many people prefer using the key fob in lieu of a traditional key with the key cylinder positioned on the car's fender. The key fob can be used to lock, unlock and sometimes, start the vehicle. These fobs work by sending an electronic signal to the vehicle via multiple antennae. Then, it uses a transponder chip confirm that the driver is a legitimate user. This is why most newer models require that drivers go to a dealer to get their fobs replaced, as per Consumer Reports.

Although this might seem like an inconvenience, it's actually a more sensible option to consult with the dealer to ensure that you receive a genuine replacement key fob, and that your vehicle is programmed correctly for the key fob. You can also usually have the cost of a replacement or duplicate fob covered under your vehicle's warranty, which can save you money over the long term.

Look inside your Subaru key fob to discover tiny gaps in the space between the front and back (instructions on opening the fob are typically in the owner's manual). When you have found this spot then open the fob by using a flathead screwdriver. Then, take out the old battery and place a 2025-sized battery in its place. Finally you can put the fob pieces back together.