• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a warm way to heat a room and also save energy. They will require some maintenance.

Many modern wood stoves comply with EPA emission guidelines. You can look for an EPA sticker on the grate or underneath it to ensure your stove doesn't release harmful pollutants.

How to Start a Wood Fire

The sound and smell of a wood burning stoves small fire can be a wonderful feature in any house. It's important to understand how to build a fire on your stove. Improper techniques can result in a fire that doesn't burn effectively and produces creosote or smoke. The following tips can help you start a safe fire that will heat up your home quickly and efficiently.

Make sure to check the condition of your logs and coals before you start a fire. If they're wet, it will smother your fire and prevent the proper burning. It is possible to open the chimney to get rid of any ash that has fallen into the stove.

Begin by putting a handful of small wood stove for shed dry pieces of newspaper into your stove. This will help to spark the tinder and ignite your kindling. When they begin to ignite, add a layer of larger pieces of kindling to the top of the pile. This should be done in a crosshatch pattern, so that there is air between each piece of wood.

If you own a wood stove that has an automatic control of combustion it will automatically supply an air stream controlled to the fire as it grows. This will allow the fire to burn for a long time without the need to open the stove's door constantly to tend to it.

It's important to avoid using too much tinder, as this could result in a fire that burns at an extremely high rate and fails to use the fuel as efficiently as possible. Once you've made a solid bed in your stove of sparks, tinder and kindling begin the main flame by laying two large base logs on the grate. Then, on the top of these base logs put a layer of wood perpendicular to them. This method of constructing the fire is known as a "top-down" fire will result in an effective and long-lasting fire that doesn't completely consume the larger base logs.

Close the damper after your fire has been established and kept it shut. The fire may be smothered by opening the damper before it is fully established. It can also decrease the effectiveness of the fire.

Adding Wood

Stoves can be used to efficiently heat your home and save you money. They can be used in conjunction with central heating systems or furnace to provide supplemental heating for large homes. Many of the new stoves that burn cleanly available use advanced combustion principles that can separate the burning volatile substances from combustible gasses and tar. This is accomplished by providing air at two different stages. The first stage is for the vaporization and the second stage is to supply fresh air that is pre-heated. This improves the combustion process and helps reduce the odors.

The amount of heat you will get from your stove depends on the kind of wood used as well as the amount of moisture, as well as the size of the logs. The logs should be stacked in a well-ventilated area for several months before you attempt to burn them, to give the wood a chance to dry out. If the logs are wet they will create lots of steam, which is basically wasted energy.

While you're burning the fire, you should add more wood to the stack at intervals, but not all at once. Addition cost of wood burning stove too much wood at once can cause the temperature to rise in the firebox, causing the formation of a vortex that pulls smoke and volatile compounds that are not burned back into flames. This can reduce the efficiency of your stove.

It is recommended to stay clear of other combustibles, such as paper or cardboard in your stove wood burning (more about bitetheass.com), as they are not wood and have very different physical properties that cannot be burned without creating dangerously high temperatures and a lot of emissions. You should not burn compressed combustibles like wood briquettes as they differ in chemical and physical composition from firewood. They are also not approved to be burned in wood-burning stoves.

It is essential that a professional install and test your wood stove. A certified WETT technician will test the stove for proper operation and safety, and also ensure that your chimney is operating properly. These experts can also provide maintenance services to keep your stove and chimney in good condition. They can inspect the areas accessible to your chimney for leaks, and repair any problems found. They will also ensure that the residents of the house understand and comply with the evacuation procedures for fire in case in the event of an emergency.

Adjusting the Damper

If you're not using your stove, a damper can control the amount of heat lost through the chimney. It can also be used to control the fire. If the flue is open but the damper is too closed the fire will not ignite properly and smoke will billow into your home. You can adjust your damper to ensure the best flames by experimenting with different settings.

You want to keep your damper open to allow air to enter and exit the flue while a fire is burning. This will allow the fire to start and remain lit for a number of hours. The right opening will also prevent the fire from starving of air and will keep it from blowing out smoke.

To adjust your damper properly it is important to first make sure that the fireplace is preheated and that the wood stove is hot. This will ensure that the chimney is warm and that it has a good draft. Once this is done, the wood stove damper may be adjusted.

After the fire has been burning for some time, you need to shut the damper around three quarters of the way. This will stop the warm air in the room from venting up the chimney while still allowing smoke to escape out of the wood stove.

This is the best method to stop the fire from becoming too hot while keeping it lit. The draft might be stopped if one closes the damper too far, but a cold wind could enter your home in the event that the damper is not closed.

You can determine how much the damper is opened by placing your hand on the top of the inside of the flue pipe. If you feel a slight breeze rubbing against your hand the damper is probably to be open.

The damper's setting can vary slightly from one stove to another and even between different types of wood. The process of experimenting with the various settings will give you an idea of what you should look for, but you might need to adjust until you get the ideal setting for your stove.

Clean Up

It is crucial to clean your chimney and stove after an incident. This reduces the chance of a fire in the chimney which is the main cause of fires caused by wood stoves. Creosote is a sticky material that forms on the inside of the stovepipe and is extremely dangerous. Unburned and moist particles of wood that are unable to escape the flame are the reason for this chemical. It can be caused by improperly lit fires.

Regular cleaning can help stop the buildup of creosote. The best method to do this is to sweep the chimney every year. It is also recommended to get your stove and fireplace professionally cleaned and examined at least year.

It is also recommended to clean the ash tray and the grates regularly. It is best to burn only wood that is well-seasoned because it produces less creosote. Avoid burning paper, cardboard and plastic. These materials can release harmful chemicals for the air and flue, that could end up in your home.

The glass on the wood stove has to be regularly cleaned too. Many newer wood stoves have self-cleaning glass, meaning that they do not require any scrubbing. You can make use of stove glass cleaners on the window if you're not capable of getting the glass as clean as you want on your wood stove.

Some other helpful tips to maintain your wood stove are to turn the vent down when you're not using it and slamming windows or doors to increase air flow. This will ensure that the fire is burning hotter, and more efficient. The wood stove will not need to perform as hard to circulate air. It is recommended not to stack logs or place them on the fire for a long duration. This could cause splits and warping. In addition, it is best to avoid using compressed combustible logs in your wood stove, as the paraffin they contain can melt and flow into the flue which could cause damage.