• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come whenever they want without you needing to let them in or out. They also prevent your cat from peeing in the house.

It is simpler to install the cat flap on a Upvc panel than a glass one, but you will require some knowledge and right tools.

Measure the Door

Installing a cat flap on the door isn't easy but if you select the right kind of cat flap, take your time and follow the steps provided it shouldn't be too much trouble. We will be showing you how to mark out the shape, use the jigsaw to slice the area in the door and then complete the job by fixing the cat flap to the door. This will ensure the flap remains in place and also protects the doors from damage caused by rain and wind.

The first step is take a measurement of the width of your pet to determine an accurate estimate of the size of cat flap you'll need. This will ensure that the flap is big enough that your pet can go inside and out of the house without needing to open and close the door every time, but also small enough to prevent the pet from straying too far in either direction.

Once you have the measurements, you can mark where on the door the template should be placed. usually this is done with an X, but some kits come with drawings that show the location to drill, if yours does then stick it to the door and use a pencil to draw around the door. If your door has moulding or a sill at the bottom, be sure you leave enough space between your cat and the moulding or sill.

Then put on your eye protection as well as a dust mask, and using a jigsaw begin cutting along the line that you've drawn in, don't try to press the blade too hard because this could cause it to cut faster than you would like it to. If you have a square that you have cut, use it to check that you are cutting correctly and to ensure that the hole is a proper rectangle. Once you are happy with this you can start to remove the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go in and out without having to worry about them coming in with guests or leaving unwelcome gifts in the home. It also prevents drafts and helps to keep the temperature in your home in a stable manner. However, Fitting Cat Flap In Upvc Door Panel an animal flap on your door can seem like an overwhelming task for those who haven't done it before, which is why many people to call a professional joiner or carpenter to complete the task. While this is certainly an option, it's possible to do the work yourself if you own the appropriate tools and follow the instructions carefully.

This is much simpler to accomplish on a wooden door, but it is still possible with uPVC. However, you must be careful not to harm the doors as this could invalidate your guarantee. The first step in the process is to take measurements of the door, making sure that it can be able to accommodate the new cat flap. This should be simple enough if you are using a standard uPVC door, however you might need to take more care if using an insulated or composite kind of door, as they can be more difficult to cut into than solid uPVC panels.

Next, you will need to determine the height of your belly for your cat. This is the distance between the floor and the bottom of your cat's stomach. You'll need to locate an area at the entrance that will allow your pet to move through easily. Once you've figured out the measurements you'll be required to mark the space using a spirit level and a pencil, so that you are certain that the opening will fit your cat.

After you have marked the area, it's now time to cut the hole. You will require an jigsaw. It is essential to take your time to ensure that the cuts are smooth and straight rather than rough and uneven, as it could cause damage to your door. Be sure to wear safety glasses and a dust protection mask when using the jigsaw, as dust from the saw can be dangerous to your health. Once you have completed the cutting, you will have to smooth out the edges of the hole with sandpaper, so that the cat flap step flap can be fitted easily into place.

Cut a hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit is quite difficult. You might be tempted to do it yourself, but unless have experience with DIY, it's recommended to hire an expert to complete the task for you. A mistake could not only look ugly, but also pose security risks. It could let cold air in when the cat is outdoors and hot air to escape when it is inside.

The first thing you have to do is mark the location of the hole in the door using pencil and an ax level. This will ensure that it is correctly positioned and that it runs parallel to other parts of the door. Make sure to have sandpaper on hand to smooth any rough edges.

Wear the safety equipment you require when working with an electric tool. If you are concerned about the sound of the jigsaw, you can purchase a cordless version which is quieter and more user-friendly to use.

It is essential to only cut away the material that is required for the fitment of the cat flap. A little bit of extra material will be needed to cover the thickness of the wall of the cat flap itself but removing more than this can cause problems and even cause damage to the door frame.

A upvc door may contain a metal frame or panel within it which could block the microchip cat flap, and in this case you will need to cut an oversize hole to ensure the metal doesn't come into contact with the wall of the cat flap. If this is done, it is essential to fill in the gap and seal it with water.

If you're planning to install an animal flap to an upvc door or a double glazed windows with a frame made of metal, you will need to speak to a professional who can provide you with a new pane of glass that already has the hole for the cat flap already drilled inside. This is less expensive than fitting a cat flap inside an existing pane that was not designed specifically for this purpose.

Install the Flap

Cat flaps give your pet the freedom to move around whenever they like and allow them to be comfortable in the house when they want to. If you have an uPVC front door, it can be difficult to put in the cat flap. This is especially the case when you don't have glass panels that is cut. If you are willing to install a half-glazed uPVC replacement upvc door panels with cat flap panel, it's possible to install a cat flap. It's not as simple as simply making a hole in the door however, and there are a few things you'll need to do first to ensure that it's safe.

A composite, uPVC or GRP door panel is typically composed of a plastic skin that is attached to an insulating polystyrene base. It is essential to be careful when cutting the material. This type of back door with cat flap fitted usually includes a template that you can use as a reference for cutting the hole in the door.

After you've marked the location of the hole in your door, it's now time to install the flap itself. You can pick from a wide range of designs, from simple push-button models to ones that are microchip-activated and only let your pet in. However, no matter what kind of cat flap you choose it is essential to ensure that your cat is able to use the flap and not get trapped outside in bad weather.

A circular fitting is more effective than a square because circles can be cut more securely into the glass. This is because square holes can leave the glass vulnerable to cracking if drills are used on it. This is also a safer option, as you won't have to drill into the toughened glass, which could break and hurt your pet or family members. This is particularly important if you have young or elderly person in your home who could be hurt by shards of glass.