• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Upvc Window Handles Replacement

The replacement of your window handles made of upvc is a simple process that requires only a few tools and steps. The key to successful replacement is to identify the type of handle you want and measuring the spindle length.

There are two types of upvc handle; Espag and Cockspur handles. Espag handles feature a square 7mm spindle that is connected to the locking mechanism fitted to the frame.

Espag handles

Espag handles are one of the most well-known types of window handles that are that are available for windows made of upvc and some timber frames as well. They are designed to be used with espagnolette multipoint locking systems. The handle features a 7mm square shaft which protrudes out from the back. It is then placed into the gearbox for the multipoint locking system to be installed inside the window. They also come in a variety of spindle lengths. This is due to the fact that every kind of window handles for timber windows handle is fixed to a multipoint locking system that has the same layout, but with a slight variation.

Typical specifications of espag window handles include a button for the closed position that is locked, key-locking and non-locking for fire escapes (where required). Some of them even comply with Secure by Design standards, which will provide you with extra assurance. They are typically connected to the sash using two screws spaced 43mm apart.

There are a variety of variations of the espag handle. The most notable is the in-line design or cranked. In-line handles can be rotated left and right. Cranked handles are only operable when the window is moving in the same direction. They can be set up clockwise or counter-clockwise. The handles can be attached to the window in any direction however they must be pointed in the same general direction as the handles on the cockspur.

The most important thing to keep in mind when choosing a replacement upvc window handle is to take the time to determine the length of the spindle. The spindle is the steel bar that extends from the back of the door handle. It could be any length from 10mm to 55mm. The length is the one that is visible when the handle is in its original unbroken condition. It is important to be able to match this when buying a new handle as the spindle is the one that controls the lock within the window.

Certain manufacturers offer a magnetic espag handle that eliminates the need to cut spindles to size. This can speed up the process of fitting by making it easier and quicker to remove and install a replacement. It is still recommended to take the time to measure the spindle to ensure that the handle will work smoothly.

Cockspur handles

Cockspur handles are found on older uPVC or aluminium windows. They do not have any locking mechanism, however they are considered safe since the handle nose closes into a wedge-shaped block which is fitted to the window frame. (This type of handle is not to be confused with timber frames which come with a catch). Cockspur handles are still popular and there's a variety of options to match the styles of doors.

They are a simple and economical choice and they can be key-locking to meet home insurance standards. There is also a choice of handle nose heights that suit different frames. A lockable version is also available that adds an additional degree of security to the window and is approved by Secured by Design.

These handle types are attached to the sash of the tilt-and-turn or casement windows using a spindle that runs through the baseplate. The handle is operated using an either side lever and the spindle of the handle is engaged by a wedge for striking that is attached to the window frame. Cockspur handle kits are available in left and right hand models. There is also a range of nose heights to fit most frames.

The correct wedge block size is the most important factor in a successful installation. It is essentially a small block of plastic designed to look like ramps and you can replace the existing one with a new one of a slightly larger size to ensure that the handle will close correctly across the gap in the window to prevent draughts. There is a certain standardization of fixing locations for these handles. They typically have 38mm and 58mm, so you will be able to locate the correct replacement without too much difficulty.

When you are choosing a handles for cockspurs, it is important to be aware of the length of the spindle. This is the distance from the baseplate of the handle to the point where the shaft of the handle is extended through the sash to the frame and it is vital that it is precise to ensure that the handles function smoothly.

Tilt and turn handles

Specially designed for windows that tilt and turn these handles are available in locking, non-locking or a tilt safe choice. These heavyweight handles have a firm grip, and detents are situated at 90 degrees. Available in different finishes, including white, black and gold. Suitable for timber window handles or PVCu tilt and turn windows.

These handles can be used to replace the upvc handle on older windows that aren't fitted with locks. However, be aware that these are distinct from espag upvc window handle stuck handles as they aren't locked and work in a different way.

They come with the "turn before tilt" mechanism which allows the window to open to the side and then lowered into a ventilation or hopper style position to let fresh air in. This type handle is also referred to as a DK or dry-keep window handle and is often used on older double-glazed windows in commercial or residential properties.

There are a lot of things to keep in mind when replacing the tilt and turn window handle. First, you must ensure that the handle you pick is compatible with your windows. This includes assessing the size of the spindle. The length of the spindle is the length of the steel rod that extends from the handle into the locking mechanism. The longer the spindle, the more security it will provide.

Handles are typically attached to your window frame or base with the screw that is placed above or below it, depending on how the window is constructed. You can use a screwdriver to remove these screws, and then remove the handle itself. It is recommended to open the handle first, making it easier to access both screw holes.

After removing the handle you will see two screws that must be removed. These decorative screw caps will then be revealed. They can be removed with a flat-head screwdriver and then the handles can be removed. The screw cap can be replaced after the handles are in the new position on your windows.

Take a measurement of the length of the spindle

The spindle of a window handle decides the manner in which it will open and close. It's important to measure your handle's length and compare it with the spindle length of a new one. This will ensure that your new handle fits in the window correctly and will be easy to open and close.

Whether you want to replace your handles or improve the appearance of your uPVC window the style of the handle will have a significant effect on how the window opens and closes. There are numerous types of handles, including inline espagnolette, cranked and key locking. There are also tilt-turn handles that are specifically designed to work with a tilt-turn uPVC window that opens both ways.

To replace the window handle find the screws that hold it in place. These are usually located above or below the window handle and can be removed using the screwdriver. Once the screws are removed, you can remove the handle and the spindle from the window frame.

The handle can be removed from the window frame and replaced with a new one. Make sure that the new handle is set in the same manner as the old one and that the spindle is properly aligned with the lock mechanism. Once the new handle is installed, it is time to fix the handle by installing the screws. If you're missing screws, you can replace them.

If your uPVC windows handles break, it may be necessary to replace them. The handle may break as a result of a strong impact or the female part that the spindle's head is located in could be worn down. This could be caused by people in your home pushing the handle to lock.

The best way to replace your window handle with upvc window handles replacement is to buy a top quality one that will last for many years. You will save money in the end. It will also give your house a a more modern and attractive appearance.