• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of unique steps to add a second ignition key. This requires the use of a handheld computer, known as Tech-2, to be used by the dealer. Then a new car key and transponder must be purchased and then programmed into the car.

Rotate your keys to prevent one from wearing out more than the other. This will also help to keep your keys in top condition.

Replacement Case

Contrary to the classic saab key fob replacement keys of old, the new keys have electronic components which makes it difficult to make a copy. This has made stealing cars much more difficult than twenty years ago. It also makes it more expensive to replace lost keys.

Saab 9-3 owners must have two keys that work. If one of them is lost, it costs a fortune to purchase a new one for the car since it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are options to avoid these costly costs. Some parts providers will look up the code from a spare key (usually the same one that opens the doors and turns on the ignition) and cut a new metal key blade at just a fraction of dealer cost. The key must, however, be the same as the original one in order to function within your car.

Follow these steps to replace the case. You will need to have an open-faced screwdriver and a lot of patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once the case has been opened take out all electronic components and place them in your new case. Make sure you put the correct key and badge back into the case as well.

Replacement Battery

The saab key programming near me 9-3 replacement battery is a low-cost part that can be quickly and easily replaced. This YouTube video from Cyclone Cyd shows how to open a saab 93 without a key to replace the battery of the remote fob with just four simple steps. This tutorial can be used for any modern saab key fob, however the procedure might differ slightly.

The first step is to locate the button that releases the backup key inside the fob. This button is usually on the back of your fob, next to the saab 9-3 key programming Logo. Next you will need an screwdriver with a flat head to insert into the small hole inside this button. This should be enough to let the fob case open to allow you to change the battery.

After the new battery CR1632 is in place You can then reassemble the remote key fob. You can then program it to your car. The whole process should not take more than an hour. It is a simple process that does not require any special tools.

If you lose a key, the process is a bit more involved but it is still able to be accomplished. The dealer has to read the car's VIN and then order a replacement key blade and TWICE module with the exact unique code. The dealer will then have to program the key using MDI which is a new software tool.

Key Replacement Fob

The key fob is equipped with batteries that are used to lock and unlock your vehicle. The batteries are able to last for and eventually expire. This is a typical issue that happens with all cars and the good thing is that you can change the batteries in many fobs, without replacing the whole case. Amazon sells replacement fobs with all the electronics in place. It is easy to remove the case and replace the batteries. It is necessary to remove the emergency key before you replace the batteries. To do this, you need to insert a small flathead screwsdriver into the slot in the middle. The case should split when you turn the screwdriver around it.

If you're ready to change your keys, keep a spare in your possession. This will save you a lot of money. If you have an additional key, you can request the dealer to cut it and program it to your car. This is a lot less expensive than purchasing a new fob.

It is possible to add another key to your car if you don't already have one, but it will require lots of research and work. The cost of adding a second key is several hundred dollars and it requires programming of the car's computer. This can be done by a professional, but it is an expensive option for the majority of owners.

Replacement Ignition

The latest SAAB 9-3 uses an alarm system that is more sophisticated based on a key code. If you lose your primary key, it may be costly to replace it with another one since the car needs to have a special computer added and be programmed to accept a new key. Dealers can even charge hundreds of dollars to program a new key in the event that they are unable to complete the task.

Dealers will charge you a high price to replace your car's computer (also called the CIM or saab 93 key fob twice) in the event that you lose your sole working key. We can reprogram the current EEPROM of your car's computer so that it is ready for an additional key. This will save you more than 50% off the cost you would pay at an auto dealer.

If you've been an owner of an 03-11 SAAB 9-3, then you likely have noticed that the ignition switch isn't really all that robust. If your ignition key isn't working properly, you should look into replacing it. They can become extremely sticky and the buttons can fall off. The good news is that replacing the ignition key isn't as difficult as it seems, and it is fairly easy to do with the appropriate tools.