• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Maintaining Timber Windows

A well-maintained timber window lock repairs is a crucial element of the historical structure of a building. It reflects in varying degree the materials and technologies of the time it was made, the design and craftsmanship.

If it is possible, repairs must be made on-site. The repair system that is based on resin can be used to fix the most deteriorated areas without removing the entire window.

Durability

The timber windows in many historic buildings were made to last for hundreds of years. They do require maintenance to ensure they look good. Maintenance tasks include sash cord repairs as well as tightening the pulleys for sash and painting. The demand for upgrading windows made of timber to increase energy efficiency is also growing. This may mean replacing old glass units, fixing existing window rebates, or installing new cills to allow the air to seal better.

A key problem with traditional windows is damage caused by the corrosion of the paintwork. This is particularly true when sash windows are involved as the gaps between sashes can be extremely wide. In these circumstances water may get through the paint film and cause rotting of the putty as well as underlying wood. The weather can be a factor in accelerating the rotting. To prevent this from happening, windows need to be regularly painted with an exterior wood paint.

In addition to repainting, areas that have corroded need to be repaired with a resin-based repair product. This will ensure that the highest possible amount of the original fabric is preserved. It is essential to limit the number of holes that are drilled into the frame in order to allow cable entry, because they could let in moisture and cause decay.

Another major issue with older windows is structural movement in the wall which can cause deformation of the frame and the sash. This can result in the sash fitting incorrectly, jamming or sticking in the opening, or breaking glass. This can be fixed frequently by putting in new sash frames constructed of slow-grown deal (pine) or oak. The cill should be made from durable hardwood such as oak to avoid any movement between the new and existing work.

There are now several companies that produce Boston pattern wooden sash to fit most existing openings. These sash are available in a variety of sizes and finishes to meet the needs of the modern homeowner. These sash are combined with quadruple draft strips and improved thermal insulation can make a significant difference to the energy-efficiency of a home.

Aesthetics

Many old timber windows have a great aesthetic value since they usually show, in a particular way the materials and technologies and architectural taste of the time in which they date. They may have significant historical value on their own. This is particularly true of windows that were unglazed in the early days of timber-framed structures, which were just a collection of openings within the frame, which were divided horizontally into mullions and iron or wood bars to keep out intrusions.

Traditional window joinery made of timber can be a stunning element of a structure and is essential to keep it looking good. It is crucial that any decay caused by moisture penetration should be removed as soon as it is discovered. This is best accomplished by painting thoroughly, especially in areas in which there is already damage or deterioration. It is recommended to use paints specifically designed to be used part of the system (primer undercoat, finish) and to follow the manufacturer's recommendations in relation to preparation and the amount of coats needed at each stage.

The fungus responsible for wet rot can spread quickly in old cambridge windows made of wood. To prevent this, take out any damaged or rotten parts as soon as you can. The replacement of wood that is rotting must be done with care with a slow-growing deal (pine) and, wherever possible, the same species as that which is being removed in order to prevent shifting between the new and old timbers.

In the late period of the 17th century and the middle of the medieval period, glass became less expensive and more abundant, so that the glazed openings in timber-framed buildings gradually became more elegant with wooden tracery, moulded mullions and deep protruding cills. In recent years, glazing was fixed to rebated frames with glazing sprigs, not lead cames. This method of glazing not only makes windows less likely to leak and also allows more clear glass sheets to be used than would have been feasible without the use of led lights.

Energy efficiency

Traditional timber windows have an excellent energy performance due to their thickness and multi-layer construction, as well as attentive attention to detail. They also feature large glass areas and deep projection cills which reduce air infiltration. With secondary glazing and draughtproofing, windows can be upgraded to improve their energy efficiency. It is crucial to remember that these measures should be considered when it comes to the overall appearance and integrity of the original windows.

It makes sense to repair or upgrade existing windows, rather than replacing them, particularly when improvements in energy efficiency can be made through simple fixes. The windows of the past often have historical significance that shows a variety of technological advancement and changes in architectural taste. Most people assume that the windows will need to be replaced in the near future. However, upvc locksmith cambridge double glazing (learn more about Yogaasanas) most will last for 150, 200 or even 250 years with proper maintenance.

It is essential to understand that the decay problems that are typical of windows made of timber can be avoided by thorough maintenance and prompt repairs. In addition it is crucial to identify damp penetration problems and address them swiftly to avoid major damage. The early deterioration of paint can be a problem because it allows moisture to get into the wood, leading to wet rot. This damage is often not noticed until the paintwork is damaged or wavy however, it can cause serious structural damage and lead to further decay.

A good quality paint will stop this moisture penetration. It is also essential to keep the paintwork clean to avoid mould and condensation. Modern synthetic paints can be problematic because they are usually designed to be water-resistant and this may result in the formation of mildew inside the window frame.

The majority of windows from the past were constructed from timber with a high proportion of sapwood. These timbers can deteriorate quickly when exposed to rain, however they can be protected with a thorough preservation process prior to use. It is important to choose the appropriate type of wood for your location and climate, as these factors will affect the durability of the joinery. Local window manufacturers provide a wide range of timber sash which can be made to fit the historic openings. They are available in the standard Boston pattern or in custom sizes to suit historical buildings.

Maintenance

Regular inspections as well as careful redecoration and prompt repairs can extend the life of wooden windows. The most common reason for decay is moisture intrusion through deteriorated putty and paint. This can be prevented by thorough painting and the use of high-quality wood preservative.

Repairs to sash windows that are old and casement window frames should be handled with care and with the least amount of disruption. It is possible to fix many traditional timber window designs without removing the frame. This should be done whenever possible. Remove any peeling or loose paint and then lightly sand the surface to improve the "key" of the surface. This will enable the new coating to adhere better. It is crucial to not remove old paint layers that may have historical significance.

When a section of wood has rotted, the best solution is to remove it and replace it with timber inserts that are shaped to match existing profiles. The inserted wood should also be treated with a wood preservative and the joint between the cill for timber and the masonry sub-cill should be sealed.

It can be tempting to replace traditional windows with PVC u, especially when the installer provides an installation that includes removal and replacement within a single day. It is essential that the person installing windows replacement has a thorough knowledge of the structure and history of traditional wooden frames. This will allow them to make appropriate recommendations for energy efficiency improvements as well as other technological upgrades that won't affect the appearance of an historic building. Window replacements should be registered with a Competent Persons Scheme like FENSA. This will ensure that the replacements are approved as a suitable option under Building Regulations. A skilled carpenter can put in PVC-u Windows that are sympathetic to the original character of the building. This is especially true where windows are installed in listed buildings and conservation areas.